cancel
Showing results for 
Search instead for 
Did you mean: 

Operator / Perimeter

Highlighted
Frequent Contributor

Operator / Perimeter

Hi -

We unable to modify the operator / perimeter to modify deep/ link / standard . It was working fine  & now couldnt find the root cause of the issue . Please suggest us if we need to modify anything .

 

perimeter.PNG

5 REPLIES
Occasional Contributor

Re: Operator / Perimeter

Hi,
If you have enough access and still not able to update , then try Translate and Compile of environment and then do changes .
Once I had similar issue and I tried this solution .

Regards,
Sashidhar.

Frequent Contributor

Re: Operator / Perimeter

@Sashidhar I did several times translate and compile , But no luck . Thanks for your response 

MEGA

Re: Operator / Perimeter

Hello

 

It is not recommended to update a standard _Operator such as 'Standard for comparison'

It is recommended instead to create a custom _Operator that inherits from the standard _Operator and to configure this custom _operator.

Screen Shot 06-19-18 at 12.09 PM.PNG

 

 

 

Jerome
Frequent Contributor

Re: Operator / Perimeter

@jhorber We have duplicated an existing perimeter and tried to modify , But no luck still . 

Metamodel changes is enabled as "expert" and "authorised" to all .Any option in the setting we need to enable for this ? 

MEGA

Re: Operator / Perimeter

Try to use explorer tool or command line to update configuration

Ultimately, configuration is saved on a link between a MetaAssociation and an _Operator

Jerome